GTP_MuNkY's Door sill GB... Now accepting payments! Get in before its too late!!

[CSI_MuNkY]

Sorry about the delay on these parts. My powder coater went on vacation (still hasn't gotten back to me) so I went to another powder coaters and they took a while.

Unfortunately I wasn't able to get my prices quite as low as Adam had his, but I do have a new option for everyone, Stainless Steel!

All prices are shipped anywhere in Canada and the USA
All prices are in USD


Bare mild steel - $100

Powder Coated Black mild steel - $120

304 2B Finish Stainless Steel - $140


Bare Steel:
Steel will be .135" 44w Mild steel laser cut and formed with 2 counter sunk screw holes (2 holes looks cleaner than 4 and works just fine)

Powder coated:
Steel will be .135" 44w Mild steel laser cut and formed with 2 counter sunk screw holes
Powder coat will be in gloss black and gloss black only UNLESS 10+ people request a different color (ex. 10 people want red)
Price is based on 10 sets getting powder coat at a time, any less than 10 people and all interested people will be given the option to downgrade to bare or upgrade to stainless.

Stainless Steel:
Steel will be .135" 304 Stainless Steel with a 2B finish, laser cut and formed with 2 counter sunk screw holes
In the picture below the 2B finish is on the bottom of the pile. I do not have access to the #8 mirror finish on the top of the pile unless I buy a whole sheet of it (you don't even want to know MY cost on that)




Group buy will close Feb 7th unless there are not enough people.
One thing I should mention is I am going to have to request a down payment from all interested buyers of $25. I will accept this down payment AFTER Feb 7th when I know there are enough people to guarantee that the group buy will occur. (I don't want to start taking people money only to not have enough people to make it happen)
Down Payments will be due between February 7, 2010 and February 14, 2010
(I know some members aren't frequent visitors of the forum and may want these but forget, if you want an update via e-mail when the time comes, I can handle that)




I guess I will start the list:

Bare:

Powder Coated:
Jamie (GTP_MuNkY)

Stainless Steel:




*edit*
These are currently only for 2 door cars
I will be working on them for 4 door cars in the new year.
I will be maintaining the same availability (bare, powder coated, Stainless)

[GOT2B GM]

Bare:

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)

Stainless Steel:
Matt (GOT2B GM)

[jeremy]

Bare:

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)

Stainless Steel:
Matt (GOT2B GM)

[3.1cutlass]

Assuming these will be for 4 door cars as well.

Bare:

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Josh (3.1cutlass)

Stainless Steel:
Matt (GOT2B GM)

[CSI_MuNkY]

Sorry I should of put that, as of right now these are only for 2 doors.

I will be doing them for the 4 doors in the new year though.

Jamie

[Venom]

Woot!

Bare:

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Josh (3.1cutlass)
Rob (Venom)

Stainless Steel:
Matt (GOT2B GM)

[3.1cutlass]

Sorry I should of put that, as of right now these are only for 2 doors.

I will be doing them for the 4 doors in the new year though.

Jamie

I look forward to them.

[GaPrix]

Nice

Bare:

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Josh (3.1cutlass)
Rob (Venom)
Greg (GaPrix)

Stainless Steel:
Matt (GOT2B GM)

[AWeb80]

Bare:
AWeb80 - (remember our deal) I'll powdercoat my own. (FYI, I also have files drawn up for 4-door ones if you want them ...J also has the only set made.)

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Josh (3.1cutlass)
Rob (Venom)
Greg (GaPrix)

Stainless Steel:
Matt (GOT2B GM)

[bg35765]

Bare:
AWeb80 - (remember our deal) I'll powdercoat my own. (FYI, I also have files drawn up for 4-door ones if you want them icon_wink ...J also has the only set made.)

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Josh (3.1cutlass)
Rob (Venom)
Greg (GaPrix)
Brian (bg35765)

Stainless Steel:
Matt (GOT2B GM)

[White93z34]

Ok, I'm in.

Bare:
AWeb80 - (remember our deal) I'll powdercoat my own. (FYI, I also have files drawn up for 4-door ones if you want them icon_wink ...J also has the only set made.)

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Rob (Venom)
Greg (GaPrix)
Brian (bg35765)
Chris (White93z34)

Stainless Steel:
Matt (GOT2B GM)

[mediabandit]

Bare:
AWeb80 - (remember our deal) I'll powdercoat my own. (FYI, I also have files drawn up for 4-door ones if you want them icon_wink ...J also has the only set made.)

Powder Coated:
Jamie (GTP_MuNkY)
Matt (GOT2B GM)
jeremy (Jeremy)
Rob (Venom)
Greg (GaPrix)
Brian (bg35765)
Chris (White93z34)

Stainless Steel:
Matt (GOT2B GM)
Steve (Mediabandit)

[GOT2B GM]

and out of nowhere, Steve is back!!

[dohc v6]

Wasn't AWeb Making these?

You guys and your Door sills lol. Very cool idea and look forward to pics.

Mark-OEM

[AWeb80]

i was, but stopped. Jamie and i worked out a deal where i gave him my CADD drawing files.