**** Official Coilover Strut Mount Buy!!! Prices And Info!! ****

[BXX]

Alright guys, after a lot of work on my part in the design and trying to find someone to actually make them, there is hope after all.

These mounts were designed by me, and here is the info on them.

*Uses Spherical Bearings As Upper Mounting Point, No Binding!!!
*Built In Spring Seat
*Uses Urathane Spring Isolator
*Fronts Are Caster Adjustable
*Increase Caster For Directional Stability!!

The fronts are caster adjustable. Not camber. Camber is factory adjusted by slotting the strut towers. Most of our cars by now have already been slotted.

Mark, aka dohcv6 will be the one doing the mounts. He has made previous sets for other vehicles, so this isnt the 1st time he has done something like this.

Anyone who wants a set, let me and Mark know, and if you want the full set, or only the fronts or the rears. Send us both PMs. I can be emailed at oneslogp@yahoo.com

***PRICING***

According to the email I recieved from Mark,

Fronts will be $190/set shipped
Rears will be $150/set shipped

Add $20 for spherical bearings per set, PTFE lined!!!

***WHAT YOU WILL NEED TO GET ALONG WITH THEM***

-Energy Suspensions Spring Isolators PN 9.6103 appx $13/pair from AutoZone

-COM10 Spherical Bearing 1.1875" OD, .500" W, .625" ID appx $10-25 each
*I recommed getting the spherical bearings from Mark - $20/pair

For the info on the design and what they look like, see my threads in Suspension..

http://www.w-body.com/forum/index.php?topic=78465.0

http://www.w-body.com/forum/index.php?topic=71448.0

All questions and concerns should have already been adressed on them in those theads. If you have other questions, comments, concerns, let me know in those threads please.

-Bob

[BXX]

Video screenshots of the parts..

Upper Front Strut Mount Plate, Caster Adjustable

http://s50.photobucket.com/albums/f3...0428092211.flv


Upper Front Strut Mount, Bolts To Upper Plate

http://s50.photobucket.com/albums/f3...0428092210.flv

Rear Upper Strut Mount

http://s50.photobucket.com/albums/f3...0428092212.flv

[BXX]

BUMP!! Seriously, lets get some interest going guys..

These prices are expensive at all!!

[GP4U2NV]

I am interested in the rear.

I already have the ES bushing. Can I just purchase the mounts for a cheaper price?

[BXX]

I am interested in the rear.

I already have the ES bushing. Can I just purchase the mounts for a cheaper price?

The price is just the mounts themselves..

I listed the items you would need to get seperately..

i.e. the spherical bearing w/lockring, ES bushing

[dohc v6]

I can also provide the spherical bearings. I get them a little cheaper then most as I buy alot at once.

[BXX]

I can also provide the spherical bearings. I get them a little cheaper then most as I buy alot at once.

Sweet that works!

what would the price increase be?

[dohc v6]

Sorry bout the late response. For the spherical bearings I would charge $20 for the pair, they would be PTFE lined.

[BXX]

Sorry bout the late response. For the spherical bearings I would charge $20 for the pair, they would be PTFE lined.

Good Price!!

My non-lined bearings cost $30 shipped on ebay

[BXX]

1st post has been edited with spherical bearing prices

[Dark Ride]

How long are you going to have these available for this price? I think I'm interested in a set for the rear and maybe the fronts haven't decided yet on those, but I'm gonna need some time to get the funds.

[BXX]

How long are you going to have these available for this price? I think I'm interested in a set for the rear and maybe the fronts haven't decided yet on those, but I'm gonna need some time to get the funds.

Well I am yet to send money (gotta wait for my bonus ) so nobody has gotten a set yet.

Mark will prolly chime in, but im sure this will be a normal price. He still needs prolly another week or 2 to finish up other items for people before he can actually get a few sets machined out..

Now who will be the 1st to have a set Its a race!!!

[GP4U2NV]

Well, hummm.

I am interested. What forms of payment?

I would just want a rear set and the bearings. So $170? IS that shipped?

[BXX]

Well, hummm.

I am interested. What forms of payment?

I would just want a rear set and the bearings. So $170? IS that shipped?

As far as I know, PM Mark (dohc v6) and he will give you more info on payment and turn around..

Basically, I designed them, Mark has/will tweak them if neccessary and is having them made.

Info on the design can come from me, info on complete costs, shipping, and turn around, forward to him

[dohc v6]

Sorry for the delayed response. With running 10 forums its a little difficult to know what I posted to. Anyways. I am just about done with a 30 set order for the j body guys. I will post some pics up tomorrow. Once I get the first payment in, I can then make a set. I would like to make a one off set first, test it on a car and make sure its all good then we can run other peoples. Who would like to pay first? I can promise any dates right now of when they will be done but the sooner I have a taker the closer to the top of my list they become.

Mark