I've seen videos for sale that are supposed to show you every step of rebuilding a 4T60E, any chance they make one of rebuilding a 3100/3400? I really want to get my topend swap done but i'm not totally sure of myself since i've never done anything quite like it... and I have no one to help me that knows wtf they are doing.
Results 1 to 3 of 3
Thread: Rebuild Video?
-
10-21-2006, 07:20 PM #1
- Join Date
- Nov 2005
- Posts
- 648
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Rebuild Video?
http://www.spudfiles.com
Blast vegetables and whatever else you can think of! :laugh:
1996 3500GP Coupe, "Bright White"
3500 swap, 60degreeV6 1393 Grind Cam, Ported Intakes, Comp Cams Valve Springs, 65mm TB, Custom Pushrods, S&S Headers, 97 PCM with DHP Powrtuner, 2.5"; back to dual Hooker Aerochambers, SS Brake Lines, Addco Swaybar, KYB's, Intrax Springs, STB's, etc!
-
10-21-2006, 11:26 PM #2Forum Moderator
- Join Date
- Sep 2003
- Location
- Dayton, OH
- Posts
- 11,057
- Blog Entries
- 1
- Thanks
- 798
- Thanked 665 Times in 389 Posts
Re: Rebuild Video?
Where do you live? I have to put a write up online about this, because I did it. It's not all that hard, but there is some minutae you have to remember.
John C. Wallace
1997 Pontiac Grand Prix GTP - L67 3800 Supercharged - 4T65E-HD - Sony MEX-DV2200 - Torquelaces FTW!!
-
10-22-2006, 09:38 AM #3
- Join Date
- Nov 2005
- Posts
- 648
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Re: Rebuild Video?
In IL, right by St.Louis.
http://www.spudfiles.com
Blast vegetables and whatever else you can think of! :laugh:
1996 3500GP Coupe, "Bright White"
3500 swap, 60degreeV6 1393 Grind Cam, Ported Intakes, Comp Cams Valve Springs, 65mm TB, Custom Pushrods, S&S Headers, 97 PCM with DHP Powrtuner, 2.5"; back to dual Hooker Aerochambers, SS Brake Lines, Addco Swaybar, KYB's, Intrax Springs, STB's, etc!
Reply With QuoteVisitors found this page by searching for:
Nobody landed on this page from a search engine, yet!
