• Welcome!

    Welcome to W-body.com!

    Hello!

    You’ve found your way to the leading community on the web for information regarding the GM W-body. Here you will find information and discussions on the following GM vehicles:

     

    ·       Pontiac: Grand Prix

    ·       Chevy: Impala, Monte Carlo, Lumina

    ·       Buick: Regal, Lacrosse, Century

    ·       Oldsmobile: Cutlass Supreme, Intrigue

     

    While you’re here, be sure to register on our message forum and join in on the many w-body related discussions with other owners. Whether you’re looking for mechanical help, or looking for used parts, our message forum has many years of information awaiting you.

    We hope you enjoy your stay, and thanks for stopping by!

     

    Luke LeCount (LukeZ34)

    W-body.com Owner

  • Energy Suspension 34mm Poly Bushing Install. FE3

    by
    badprix
    Rate this article
    Published on 02-07-2010 06:29 AM  Number of Views: 1755  
    THESE P #'S ARE FOR FE3 ONLY

    BUT THE INSTALL WILL BE THE SAME FOR OTHERS AS WELL.


    they are Energy suspension P#'s

    Front inner: 9.5173
    Front outer: 9.5159

    The bar is 34mm and the bushing is 35mm on the inners and the bar is 22mm and the bushigns are 23mm on the outers...I got the 1mm bigger ones because they are the only size close enough that were greasabel.....on the test ride, there were no problems and uppon installation, everything looked fine.



    I'm very impressed w/ the quality of the bushings and the mounts. Well worth the ~$32 total that it cost...free shipping from
    http://www.energysuspensionparts.com/



    I had an extra bar so i got it powdercoated grey....I now have my stock 34mm bar FOR SALE if anyone wants it. PM me.


    and yes, you HAVE to lower the rear subframe to get the bar out....not that hard to do...just takes an extra jack to hold the subframe from falling to the ground.


    I noticed an imediate difference in steering response and the car wanting to turn in to a turn and not body roll...well worth the investment.












    This article was originally published in forum thread: Energy Suspension 34mm Poly Bushing Install. FE3 started by AWeb80 View original post
    1. Categories:
    2. D.I.Y,
    3. Suspension

  • Who's Chatting