PDA

View Full Version : WTB: Passenger Side 94-96 B4U Body Cladding



WhatTheFehl
01-12-2011, 06:28 PM
Okay, more like need to buy than want to buy. I would prefer Dark Teal Metallic, but I will settle for any color (I can repaint them of course). I know I need the lower edge door molding, the rear quarter molding, and the front fender molding (the upper door molding looks okay). That's all I know for sure. Let me know what you have, will pick up if local, shipping to 15136 (though I'm afraid it would be prohibitively expensive).

AL
01-12-2011, 06:30 PM
If the seller is close to me ill pick it up also... I head to his area quite a bit

White93z34
01-12-2011, 06:33 PM
what about that green b4u 94-96 that straus has?

WhatTheFehl
01-12-2011, 06:36 PM
what about that green b4u 94-96 that straus has?

I thought the passenger side on that was fucked up or broken? Duno, I haven't been out there since the meet. For all I know it isn't there anymore.

Breakdown
01-13-2011, 06:01 AM
I thought the passenger side on that was fucked up or broken? Duno, I haven't been out there since the meet. For all I know it isn't there anymore.

Jamie's got a set, don't know if he'd part with just one side's worth, send him a PM. And maybe Nunzi can smuggle it back into the US for you.

WhatTheFehl
01-13-2011, 08:39 PM
Update: Upon closer inspection, I will need a passenger front fender too.

jimmyfloyd
01-14-2011, 01:53 PM
can you get the RPO code for the paint color you are looking for?

GOT2B GM
01-14-2011, 04:27 PM
I know Jamie has this B4U stuff (in red and maybe teal)

Chris is coming up and may be able to take it back with him.

CSI_MuNkY
01-14-2011, 04:31 PM
I have 2 full kits, I will get pics this weekend for you (only have access to the red one on short notice, teal would have to wait a few weeks to get to my parents)

WhatTheFehl
01-14-2011, 05:51 PM
can you get the RPO code for the paint color you are looking for?

35U


I have 2 full kits, I will get pics this weekend for you (only have access to the red one on short notice, teal would have to wait a few weeks to get to my parents)

I would really appreciate it!

White93z34
01-15-2011, 02:47 PM
http://pittsburgh.craigslist.org/pts/2157928877.html

WhatTheFehl
01-15-2011, 05:37 PM
http://pittsburgh.craigslist.org/pts/2157928877.html

Sent him a message. Let's see what happens.

WhatTheFehl
01-18-2011, 05:51 PM
Bump. That guy on craigslist hasn't gotten back to me yet...

mra32
01-18-2011, 08:52 PM
There is a similar car to yours in the EZ Pull in new ringgold. Didnt verify the quality of the body panels, but if someone is going soon, then you could request that they get it...long shot

WhatTheFehl
01-19-2011, 08:06 PM
Bump. Please guys, I need this desperately and I have very little time to go junyarding (never mind the fact that the weather here SUCKS).

AL
01-20-2011, 08:16 AM
Mike I think your best bet is to wait for Jamie to be able to make it out to his parents house so you can have the proper color...

White93z34
01-20-2011, 08:21 AM
If you need the parts desperately I'd buck it up and head to the local junkyard where you know they have a car like yours. I've done lots of miserable jobs in the middle of the winter.

Breakdown
01-20-2011, 08:46 AM
Mike I think your best bet is to wait for Jamie to be able to make it out to his parents house so you can have the proper color...

Jamie does NOT have the proper colour (his parts are in Canada so we spell it colour), I'm 90% sure that his are teal, the aqua one that Axxxxxxy used to have, not the near forrest green colour of Fehl's car - I could be wrong, but that's how I remember Ryan's Grand Prix. I also thought that his car was damaged in the same place.

I would also hold out for proper coloured panels.

AL
01-20-2011, 01:14 PM
Ah... I wasn't sure of the colour difference

GOT2B GM
01-20-2011, 04:36 PM
Ok I can get all of that cladding in the proper color tomorrow.

$50 and Nunzi can bring back.

LMK

WhatTheFehl
01-20-2011, 05:22 PM
Ok I can get all of that cladding in the proper color tomorrow.

$50 and Nunzi can bring back.

LMK


Seriously? Wasn't expecting that :lol:. You got a fender too?

WhatTheFehl
01-20-2011, 07:47 PM
If you need the parts desperately I'd buck it up and head to the local junkyard where you know they have a car like yours. I've done lots of miserable jobs in the middle of the winter.

I'm desperate because at this point I can't even get the passenger door open very far because of how the fender is bent. This makes transporting people or things difficult. I am not desperate enough at this point, however, to get on my hands and knees in a foot of snow, dig out the fender, and remove it. Primarily because I'm not properly equipped for that nor do I have the time (I have plans this weekend... and if I skip out on them I will have a few people quite mad at me). By the time I get out of work it is already dark, so that makes doing anything at a junkyard even more difficult.

GOT2B GM
01-20-2011, 08:02 PM
Fender has some rust and isn't really worth pulling. I'll pull the cladding tomorrow if you want it for $50 (all 3 pieces) and send it back with Chris. Let me know tonight either way.

WhatTheFehl
01-20-2011, 08:03 PM
Fender has some rust and isn't really worth pulling. I'll pull the cladding tomorrow if you want it for $50 (all 3 pieces) and send it back with Chris. Let me know tonight either way.

I do have a lead on a fender locally, but the cladding for sure.

GOT2B GM
01-20-2011, 08:06 PM
Paypal: mshantz83@hotmail.com

GOT2B GM
01-21-2011, 04:07 PM
Good news and bad news. Car was frozen into the ground, but I was still able to get the front fender flare piece.

The paint is good and plastic is not torn or cracked.

I need $25 to break even.

WhatTheFehl
01-23-2011, 01:13 PM
Alright, I'll pay you that soon. Sucks that was all you could get though :(.

GOT2B GM
01-23-2011, 02:58 PM
:shrug:

jimmyfloyd
01-25-2011, 02:25 PM
Just put this in today. 35U. Fender and all ground effects look good, except for the front fender flare. Going to be a bit more than $50 to pull all the pieces and ship them, but if you are interested, i can get details and try. Will need to know how to remove each piece though without damaging it.

3210


3211

GOT2B GM
01-25-2011, 02:53 PM
There you go , things always have a way of working out

WhatTheFehl
01-25-2011, 05:37 PM
I have no idea how to take them off without breaking them. The only time I've ever taken the pieces off of mine it was by force of fence post :lol:. Definitely want the pieces though. Let me know.

WhatTheFehl
01-28-2011, 05:51 PM
Bump. I still at least need the piece that goes underneath the door.

jimmyfloyd
01-31-2011, 08:42 AM
Didn't forget about this, but have had other things to do at lunch. Was going to go today, but forgot my wallet at home, so maybe tomorrow or wednesday. I am only able to get there on my lunch break, so things don't really happen fast.

jimmyfloyd
02-10-2011, 01:07 PM
http://i282.photobucket.com/albums/kk241/jimmyfloyd182/Mobile%20Uploads/downsized_0210011303a.jpg

$20. The rear fender molding has some small cracks where it connected to this one, but they'd probably be hidden. The fender was still there, just didn't have the tools and it was too cold to be out long.

WhatTheFehl
02-19-2011, 07:32 PM
Shit. Didn't see that you had posted this. I definitely want the piece, I don't need the fender (already picked one up and installed it). I'll send you a PM