View Full Version : wiring problems
09-11-2002, 07:36 PM
i've got a 90 gp, and i'm trying to take the digital dash from an 89 and put it in mine. so far, i've been unable to find a wiring diagram to make it work. any help would be appreciated
09-11-2002, 09:00 PM
isn't this the same as what is here?
not sure this is why i ask and not just say do this.
09-11-2002, 09:10 PM
The GP dash is different than that but it may use the same basic setup on connectors.
09-11-2002, 10:25 PM
I thought I remember someone saying once that the Grand Prix digital dash is made by Delco, therefore it has the same pinouts as the 90 analog cluster. In fact, I know others have gone the other way from digital to analog.
09-14-2002, 01:04 AM
well, see, the dashes are both made by delco. but, the pinups are different. in fact, my harness has almost half as many wires as the 89 i took the dash from. the link to the other page might be very helpful, but i would still like to use this dash, which is completely different from the supreme's. my problems with the dash are 1-the oil pressure gauge doesn't work; 2- the led for the speedometer only lights up with the parking lights; 3- the odometer also does not work. now, maybe you all can see why i need the wiring schematic.
09-14-2002, 01:31 AM
Was your original cluster a gauges cluster with oil pressure, volts, etc? Or was it a base cluster?
09-15-2002, 12:21 PM
my original cluster is the analog cluster with voltage, oil pressure, etc. i just don't want to start plugging wires to make the other dash work and end up frying it.
09-18-2002, 08:38 PM
I used to have a Grand Prix SE and i put a dash from a 93 Grand Prix GTP and it worked without any changes just plugged in and worked. :idea:
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.